All

All
Product Management
News and Information
Frequently Asked Questions

Product Series

Contact Information

Company Address No. 3716 Qingdao Road, Huaiyin District, Jinan City, Shandong Province, Unit 1801, China Construction Jinxiu Plaza.

Production base Juye Chemical Industry Park, Heze City, Shandong Province.

Nanjing Branch Company Room B2304, Nanjing University of Technology (Dingjiaqiao Campus), No. 5 Xinmofanma Road, Gulou District, Nanjing City, Jiangsu Province.

Phone ： +86-531-88986356

Phone ：+86-15562623709
Email ： sdprio@sdprio.com

PO-300 Reverse Osmosis Flocculant

Category:

Membrane treatment chemicals

Request a quote now

Related Downloads

Send email

Keywords:

Membrane treatment chemicals

Detailed introduction

Product Performance

PO-300 The reverse osmosis flocculant is a polymeric flocculant composed of precisely processed inorganic salts and water-soluble polymer polymers. In addition to the strong charge neutralization capability and adsorption-flocculation effect characteristic of inorganic polymeric flocculants, it also exhibits the robust adsorption-bridging action typical of organic polymeric flocculants.

Product Features

(1) Water-soluble, high-molecular-weight organic flocculant that rapidly forms flocs, exhibits fast coagulation speed, produces dense and robust floc particles, and boasts excellent settling performance.

(2) Adapted to aquatic environments ph Scope Relatively Wide.

(3) It is also effective in removing turbidity and eliminating bacteria and algae.

(4) It is unaffected by chlorination and does not increase the concentration of soluble metals (aluminum and iron) in the treated water.

(5) By increasing the solid-liquid separation rate, the working cycle of the filter can be extended during direct filtration.

Technical indicators

Project	Indicator
Appearance	White transparent liquid
Density (20℃), g/cm³	1.15 ± 0.05
pH value	4.0–6.0
Water-soluble	Easily soluble

Instructions for use

Dosage point: To achieve maximum efficacy PO-300 It’s best to add it before the sand filter.

Dosage: PO-300 The dosage of the flocculant needs to be calculated based on the turbidity, suspended solids, and colloidal content of the incoming water. After treatment, SDI The value (pollution index) can be less than 3 Residual turbidity (National Taiwan University) Generally for 0.067 Around, the removal rate is generally 80% Left and right, and can significantly reduce sludge generation; recommended dosage of chemicals is reduced. 2-10ppm For specific details, please consult Prio's technical engineers to determine the dosing point and dosage amount based on your particular system conditions. In certain systems, specific dosing points and injection equipment are essential.

Dilution: It is recommended to prepare the solution when using. 10-20% The aqueous solution should ideally be prepared using neutral water free of salts and other impurities (the stirring speed of the dissolution tank agitator must not be too high).

Packaging, Storage, Transportation, and Precautions

Packaged in plastic buckets, 25kg/ Barrel, 200kg/ The container shall be determined according to user needs; store in a cool, dry place with a shelf life of twelve months. During operation, pay attention to occupational safety and avoid contact with skin, eyes, and other sensitive areas. If contact occurs, rinse thoroughly with plenty of water.

Related Downloads

Application scenarios