All

All
Product Management
News and Information
Frequently Asked Questions

Product Series

Contact Information

Company Address No. 3716 Qingdao Road, Huaiyin District, Jinan City, Shandong Province, Unit 1801, China Construction Jinxiu Plaza.

Production base Juye Chemical Industry Park, Heze City, Shandong Province.

Nanjing Branch Company Room B2304, Nanjing University of Technology (Dingjiaqiao Campus), No. 5 Xinmofanma Road, Gulou District, Nanjing City, Jiangsu Province.

Phone ： +86-531-88986356

Phone ：+86-15562623709
Email ： sdprio@sdprio.com

PO-150 Reverse Osmosis Membrane Antiscalant

PO-150 Reverse Osmosis Membrane Antiscalant

Category:

Membrane treatment chemicals

Request a quote now

Related Downloads

Send email

Keywords:

Membrane treatment chemicals

Detailed introduction

Product Performance

PO-150 It is an efficient liquid scale inhibitor. 、 Dispersant suitable for surface water. It prevents the deposition of hardness and iron oxide by dispersing high-molecular polymers and effectively disperses organic matter. Using this scale inhibitor can extend the system’s cleaning cycle, prolong membrane life, and reduce costs.

Product Features

(1) Can be used in combination with organic flocculants. 。

(2) Can be used to produce drinking water 。

(3) Effectively control scaling caused by calcium carbonate, calcium sulfate, barium sulfate, and strontium sulfate. L.S.1 Worth up to 3.0 Does not cause scaling. 。

(4) Compatible with mainstream Reverse osmosis membrane 。

(5) Dispersive resistance Stop Particles are used to keep the reverse osmosis membrane surface clean. 。

(6) Inflow pH At 5~9 Valid within the scope. 。

Technical indicators

Project	Indicator
Appearance	Colorless to pale yellow transparent liquid
Density (20℃), g/cm³	1.10 ± 0.05
pH (1% aqueous solution)	2.0 ± 1.0

Instructions for use

Dosage point: To achieve maximum efficacy, PO-150 The antiscalant for reverse osmosis membranes should be added before the mixer or the security filter. When preparing the solution, ensure thorough mixing. 5-10 Minutes—regularly clean the dosing tank to prevent bacterial growth.

Dosage of chemical additives: The required dosage of chemical additives shall be determined based on the specific operating conditions of each unit. The appropriate dosage should be calculated according to factors such as influent salinity, temperature, recovery rate, and type of reverse osmosis membrane. The recommended dosage is: 2-5PPM。

For specific details, please consult Prio's technical engineers, who will determine the dosing point and dosage amount based on your particular system conditions. In certain systems, specific dosing points and injection equipment are essential.

Dilution: PO-150 The antiscalant for reverse osmosis membranes can be added directly or used after dilution; dilution must be performed using... R0 Produced water or desalinated water—recommended dilution multiples are: 10 Twice, the dilution factor should not exceed. 20 Twice.

Packaging, Storage, Transportation, and Precautions

Packaged in plastic buckets, 25kg/ Barrel, 200kg/ The container shall be determined according to user needs; store in a cool, dry place with a shelf life of twelve months. During operation, pay attention to occupational safety and avoid contact with skin, eyes, and other sensitive areas. If contact occurs, rinse thoroughly with plenty of water.

Related Downloads

Application scenarios